4.Grasp the tab on the hard drive cable connector (3), and then carefully press the hard drive cable connector onto the system board until it snaps into place.
5.Replace the vanity cover (see Replacing the vanity cover on page 31).
6.Replace the battery (see Inserting the battery on page 29).
7.Reconnect external power and external devices.
8.Turn on the computer.
Replacing the memory module
The computer has one memory module slot. The capacity of the computer can be upgraded by replacing the existing memory module in the memory module slot.
WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module.
CAUTION: Electrostatic discharge (ESD) can damage electronic components. Before beginning any procedure, ensure that you are discharged of static electricity by touching a grounded metal object.
To replace a memory module:
1.Remove the battery (see Removing the battery on page 30).
2.Remove the vanity cover (see Removing the vanity cover on page 31).
3.Remove the existing memory module:
a.Pull away the retention clips (1) on each side of the memory module. The memory module tilts up.
34 Chapter 6 Maintenance