HP WHR--AG108 manual Aoss

Page 12

AOSS

AOSS (AirStation One-Touch Secure System) is a simple system for configuring your wireless network securely. If your router and your client device are installed and both support AOSS, then making a secure wireless connection between them is very easy.

Push the AOSS button on the top of your router and hold it in for a few seconds. The AOSS light will begin to flash amber. You now have two minutes to push the AOSS button on your client device and finish the connection.

If you have a standalone client device,

 

 

 

it will probably have a little red button

 

 

 

labled “AOSS” on it. Push the button!

 

 

 

About 15 seconds later, you’ll have a

 

 

 

secure network connection.

 

 

 

If your client device is a PCI or CardBus

 

 

 

card, CardBus, the AOSS button will

 

 

 

probably be in its Client Manager

 

 

 

Software. Check your client device’s

 

 

 

user manual for instructions on where

standalone cli-

PC card

Client Manager

to push or click the AOSS button.

ent device

 

Software

After you’ve pressed both buttons, it will

take about 15 seconds for the connection to complete. When it’s finished, the AOSS light will glow a solid amber. You now have a secure network connection!

12

Image 12
Contents Page Table of Contents Table of Contents Specifications Troubleshooting Introduction System RequirementsBasic Setup Getting Ready Connecting your AirStation Log in to the Configuration Tool Detecting Your Broadband Connection Home Aoss Aoss Notes Some things to keep in mindBridge/AP Mode Manual Client Configuration System Info AirStation Configuration Tool Home Internet Games Port Mapping Firewall/Intrusion Detector Windows MSN Messinger/UPnP Wireless Encryption Wireless Channel Firmware Update Internet Connection Multisession Reset Advanced Settings WAN Config WAN Port PPPoE LAN Config LAN Port Advanced Dhcp Settings Dhcp Server Manual Assignment of IP Address Network Config Route Info Network Configuration Edit Routing Information NAT NAT Manual Entry IP Filter IP Filter Add/Delete Basic Rules IP Filter Configure IP Filter Network Configuration Intrusion Detector UPnP Aoss 802.11a Basic 802.11a Security 802.11g Basic 802.11g Security MAC Filtering MAC Access Limit Edit Registration List Advanced SettingsAdmin Configuration Name/Password Admin Config Date/NTP Syslog Transfer Save/Load Configuration Initialize/Reboot Firmware Update System Information Log Information Packet Traffic Information Client Monitor Ping Test Connecting to a Preexisting Network Auto to BRIAntenna Specifications WHR-HP-AG108 AirStation SpecificationsRegulatory Information Troubleshooting Common ProblemsDiag LED Activity Table Other Problems Glossary Glossary Glossary To hardware that requires further manual configuration Glossary Glossary Glossary FCC / CE Information FCC WarningPotential restrictive use Page Page Page Page Page Page Français French Page Page Page Page 54/108* Disclaimer Warranty Information Contact Information General InquiriesEmail sales@buffalo-technology.com