HP manual Identifying the SR2122-2 Version Level

Page 5

Identifying the SR2122-2 Version Level

Identifying the SR2122-2 Version Level

You can determine the SR2122-2 software version level by typing the following command at the SR2122-2 CLI prompt:

[SR2122-2]# sho version

The resulting display lists the software version level:

Hewlett-Packard SR2122 Storage Router

CLI Version:	2.1
iSCSI Version:	0/2 (Min/Max)
System Bootstrap:	3.4.5b-K9
Operating System:	3.4.5b-K9
Application:	3.4.5b-K9
Web Server:	R6_1_0
OpenSSH:	3.4p1
OpenSSL:	0.9.6e
Zlib:	1.1.4

Copyright (c) 1994-2003 Hewlett-Packard Company

[SR2122-2]#

SR2122-2 IP Storage Router Release Notes

5

Image 5

Contents Hp StorageWorks SR2122-2 IP Storage Router Copyright 2004 2005 Hewlett-Packard Development Company, L.P Release notes information About this documentIntended audience Other SR2122-2 IP Storage Router documentationOverview Identifying the SR2122-2 Version Level Identifying the HP Windows iSCSI driver version level Identifying the HP-UX iSCSI Software Initiator versionIdentifying the Linux Red Hat iSCSI driver version level SR2122-2 software and iSCSI driver updatesNetwork interface controller NIC hardware support Hardware and software supportOperating system software support Compaq Network Teaming software supportSR2122-2 router rules SR2122-2 configuration rulesISCSI host rules Operation system rulesUpdates/Fixes for this release of firmware Fibre Channel switch/fabric rulesStorage array rules Management software rulesSeries MDS v2.01b switch firmware requirements Known problemsISCSI CRC support Ports FC1 and FC2 are set to Loop Preferred by default