Connecting to a Novell NetWare 4.11 Server
Microsoft Windows 98 2nd edition
Microsoft Windows 98 2nd edition
10 Connecting to a Novell NetWare 4.11 Server
Requirements
Operating System | Windows 98 2nd edition |
|
|
Driver Version | 3.37.07 |
|
|
Driver File | E100bnt.sys |
|
|
Server OS | Novell NetWare 4.11 Server |
|
|
Client OS | Client v3.1 for Windows 95/98 |
|
|
Procedure
1With the HP Vectra turned off, install the network adapter into a PCI slot.
2Connect the network cable to the newly installed network adapter.
3Power on the machine and boot to Windows 98.
4Windows 98 will detect the network adapter as “Intel PRO/100B PCI Adapter” during start up and install the OS embedded driver.
5Click on “Yes” when Windows 98 prompts to restart the system.
6After restarting the system, additional changes in the network properties, such as: workgroup name, computer name, etc. may be necessary. Ask your Network Administrator for more information. Restart the system if changes are made.
7From the location of the “Novell Client v3.1 for Windows 95/98” installation files, execute “Setup.exe”.
8Click on “Yes” to accept the “Novell Terms and Conditions”.
9Select either “Typical” or “Custom” and click on “Install”. Typical Installation is normally chosen. Select Custom Installation only if you are an administrator or an advanced user. When prompted for options during installation, ask your Network Administrator for more information.
10Click on “Reboot” once the installation is complete.
20