HP Drive manual Dmm.DCVoltage.Configure1.5, Dmm.Trigger.Delay =, Type double reading, Dmm.Close

Configure the Instrument

To set the range to 1.5 volts and the resolution to 1 millivolt, type

dmm.DCVoltage.Configure(1.5, 0.001);

Set the Trigger Delay

To set the trigger delay to 0.01 seconds, type

dmm.Trigger.Delay = 0.01;

Set the Reading Timeout/Display the Reading

Create a variable to represent the reading and display the reading:

1Type double reading;

2To trigger the multimeter and take a reading with a timeout of 1 second, type reading = dmm.Measurement.Read(1000);

3Type Console.WriteLine("The measurement is {0}", reading);

4Type Console.ReadLine();

Close the Session

To close out the instance of the driver to free resources, type

dmm.Close();

•

•

Using IVI with Visual C# and Visual Basic • 33

•

•

•