HP NC6133 manual Technical Specifications, General Specifications

QuickSpecs

Compaq NC6132 Gigabit Module 1000 SX

Technical Specifications

General Specifications	Communications Processor	Intel 82542
	On-board memory	Full-duplex
	Data path	64 KB
	Interrupt levels	32- and 64-bit/33MHz
	Bus architecture	INTC
	Connector	PCI bus-mastering
	Wavelength	SC
	Distance	SX = 850nm
	Wiring	Up to 1,804 ft/550 m
	Dimensions (LxW)	Multi-mode fiber (50mm and 62.5mm)
		6.5 x 2.5 in/16.5 x 6.4 cm
	IEEE 802.3z compliant 1000 Mbps Ethernet specification
	64-bit addresses for systems with more than 4 GB of physical memory
	64-bit PCI host interface compliant with PCI 2.1
	Command usage optimization for advanced PCI commands (MWI and memory reads)
	Additional statistics for management and RMON
	Software controlled global reset bit (resets everything except PCI configuration registers)
Power and Environmental	Operating	Temperature	32° to 131°F/0° to 55°C
Specifications
		Humidity	10% to 90%
	Non-operating	Temperature	-85° to 185°F/-65° to 85°C
		Humidity	5% to 95%
	Power requirement	1025 mA @ 5V maximum
	Emissions Standards	FCC Class A
		FCC Class B
	Safety Compliant	CE Mark
Operating System Support	Windows 2000
	Windows NT 4.0
	Windows NT 3.51
	Novell NetWare 5.x Server
	Novell NetWare 4.x Server
	Novell NetWare 3.x Server
	SCO UnixWare 7.x
	SCO OpenServer 5.x
	SCO UnixWare 2.1
	OS/2 Warp Server
Kit Contents	NC6132 upgrade module hardware
	CD-ROM: software and documentation

Quick Install Guide

Product warranty statement

DA - 10059 North America — Version 9 — August 18, 2003 Page 6