HP 7500 I manual Installation

Page 13

Installation

ATI RADEON 7500 PCI Graphics Controller Installation Guide

7.Grasp the top edge of the graphics option, carefully insert it into the slot, and seat it firmly.

8.Secure the module with the screw.

9.Replace the computer cover.

10.Ensure that the monitor cable is connected to the video output connector located on the back of the graphics option.

11.Reconnect the AC power cables to the wall outlet (or turn on the circuit breakers if applicable to your system) to restore power to the system.

12.Perform a normal power-up of your computer system.

13.If the system is an HP-UX system, you must switch the system console over to a serial console. See “Changing the Boot Console” on page 16.

6

Chapter 2

Image 13

Contents First Edition ATI Radeon 7500 PCI Graphics Controller Installation GuideLegal Notices Contents Figures Intended Audience PrefaceDocument Structure Notational ConventionsWeb Site for HP Technical Documentation Http//docs.hp.com Reader Comments and Feedback Related InformationPrinting History Introduction OverviewModule Description Option NumbersATI Radeon 7500 PCI Graphics Controller Standard 15-Pin VGA Connector Pinout Connector PinoutsThis Page Intentionally Left Blank Installation Procedure InstallationUnpacking Installation Supported Video Modes OpenVMS Video Resolutions SupportedDefault Depth 24 Bits Per Pixel Restrictions, Limitations and DefaultsMinimum Console Revision No VGA Console SupportSingle Pixel Depth No Mixed Depth Windows Multiple Colormaps 8 Bits Per PixelVisual Types PCI Bus Performance Under LoadTransformation, Clipping and Lighting Support Multiple Graphics Cards SupportThreads Restriction No Backing Store/Save Under for 3D WindowsATI Radeon 7500 Default Graphics Settings Modifying the Graphics ConfigurationDetermining Current Settings Overriding the Default SettingsServer Startup and Configuration Messages Troubleshooting Criteria TroubleshootingResolution and refresh rate being Verification of Software Installation HP-UX ConfigurationPlease select a boot option Changing the Boot ConsoleATI Radeon 7500 as Default Xserver Device Verification of Hardware InstallationDefault Visual Information ResolutionsRestrictions and Limitations No Accelerated 3D SupportHow to Change the Resolution and Refresh Rate Current Graphics ResolutionMultihead Support XF86Config ChangesDual-screen ATI Radeon 7500 PCI Graphics Controller Installation Guide Messages Problem Description Solution