HP LH4r, NetServewr, LH 4, LH 3 manual Installing the Chassis Reinforcement Bars

Page 26

Chapter 3

Installing LH 4 Components

10.Replace the boards in the memory cage. Lower the ejection levers to lock the board into place in the cage.

11.Close the cover of the memory cage.

Additional Processor, VRM, and Memory Configurations

The LH 4/LH 4r CPU baseboard is shipped with two processors, two terminators, and four VRMs. If you are installing additional processors at this time, refer to the processor upgrade kit documentation and install them, and install the new VRMs as well.

The LH 4/LH 4r CPU baseboard contains two 64 MB DIMM modules. If you are installing additional memory at this time, refer to the memory upgrade kit documentation and install it with the other DIMMs.

Installing the Chassis Reinforcement Bars

The chassis reinforcement bars are two metal bars that help hold the CPU baseboard in place in the LH 4/LH 4r chassis. Since the CPU baseboard fits into to small slots on the lower chassis reinforcement bar, you need to install these bars before installing the CPU baseboard.

Insert the chassis reinforcement bars next to the CPU baseboard, as shown in Figure 3-8. There are four Torx thumbscrews that secure the two bars to the chassis, and two Torx thumbscrews that connect the CPU baseboard to the top chassis reinforcement bar.

NOTE

If you are installing the chassis reinforcement bars while the

 

LH 4r is in the rack, you must install them from underneath.

 

 

22

Page 25 Page 27
Image 26
Page 25 Page 27
Contents HP NetServer LH 3/LH 3r To LH 4/LH 4r Upgrade Guide Audience Assumptions Contents Update the Operating System Related Documentation PrefacePurpose of This Guide Power Supplies Needed Tools You NeedPrecautions Page Installation Overview IntroductionChapter Verifying Contents Saving the Current Operating Environment Preparing for Hardware Upgrade For Non-HP Compaq Racks Upgrading the Rack LH 3r ConfigurationFor HP Racks Removing Covers and the CPU Baseboard Removing the Bezel and CoversLH 3r Removing the LH 3 CPU Baseboard Removing the CPU Baseboard Guide and Air BaffleLH 3r Installing LH 4 Components CPU Baseboard ComponentsProcessor and VRM Configurations CPU Baseboard LayoutVRM Name on Baseboard Installing Processors Installing Processors in Processor CageInstalling Memory Opening the Memory Card CageRemoving the Memory Cards Inserting DIMMs into Memory Board Installing the Chassis Reinforcement Bars Additional Processor, VRM, and Memory ConfigurationsInstalling the Chassis Reinforcement Bars Installing the CPU Baseboard in the Chassis Inserting the LH 4 CPU Baseboard into the Chassis Installing a Redundant Power Supply Installing the LH 4r in the RackFinishing the Hardware Upgrade Page Update System Firmware Updating FirmwareUpdating Firmware Update the Operating System Chapter HP Repair and Telephone Support Warranty and SupportHardware Warranty Page Regulatory Information Page Index Backing up disksIndex

LH 4, LH4r, LH 3, NetServewr specifications

The HP NetServer series, particularly the LH models (LH 3, LH 4, and LH 4r), represents a significant advancement in server technology during the late 1990s and early 2000s. These servers were designed for small to medium-sized businesses, providing reliable performance, robust features, and a cost-effective solution for various computing needs.

The HP NetServer LH 3, introduced in 1996, was a dual-processor machine that tapped into the capabilities of the Intel Pentium Pro. It was notable for its scalability, supporting up to 4GB of RAM, which was impressive for its time. Its architecture enabled it to handle multiple workloads simultaneously, making it ideal for web hosting and database applications. The server was equipped with advanced storage options, featuring SCSI interfaces and a range of RAID configurations to ensure data redundancy and speed.

Moving to the LH 4, released in 1997, this model pushed the boundaries further with enhancements in processing power and efficiency. The LH 4 supported Intel’s newer architectures, including the Pentium II processors, boosting performance for demanding applications. Its design emphasized hot-swappable components, allowing for easier maintenance without downtime — a crucial feature for business continuity. The LH 4 supported larger memory configurations, up to 8GB, facilitating more significant data processing tasks and multitasking capabilities.

The HP NetServer LH 4r, a rack-mounted version of the LH 4, provided a compact form factor suitable for environments where space was at a premium. This model was particularly popular among enterprises that required high-density computing solutions. The LH 4r maintained the reliability and performance characteristics of its predecessor while providing additional features such as advanced thermal management and improved network options, including gigabit Ethernet.

Key technologies across these models included HP’s Dynamic Smart Array technology, which optimized data storage and retrieval. The inclusion of Windows NT as a supported operating system ensured compatibility with contemporary applications, enabling businesses to leverage existing software investments.

In summary, the HP NetServer LH series, especially the LH 3, LH 4, and LH 4r models, represented a remarkable evolution in server capabilities. With their robust performance, flexibility, and user-centric features, these servers addressed the burgeoning demands of the business IT landscape, helping organizations achieve their operational goals. Their legacy lives on in the server technologies that continue to evolve today.
Top Page Image Contents