HP mt40 Mobile manual Setting the HP Velocity operational mode on Linux

HP Velocity user interface HP Velocity on Linux

When HP Velocity is running on a Linux thin client, the HP Velocity icon appears in one of four colors that correspond to the HP Velocity operational modes (Table 2).

Table 2. HP Velocity icon color codes on Linux.

Icon	Color	Mode	Description
	Green	Active	HP Velocity is protecting one or more flows.
	Blue	Active	HP Velocity is protecting, but flows have not been
			established.
			HP Velocity is profiling present and trending network
	Orange	Monitor	conditions. In this mode, HP Velocity does not
			protect flows.
	Gray	Disabled	HP Velocity is disabled.

Setting the HP Velocity operational mode on Linux

Once the HP Velocity Network Manager is running, select an HP Velocity operational mode (Table 2) using the radio control (Figure 5).

An administrator should only change the HP Velocity mode of operation:

•During troubleshooting to disable HP Velocity

•After troubleshooting to re-enable HP Velocity

•As directed by HP support

To set the HP Velocity operational mode:

1.Log in as a user with root privileges.

2.Select Control Panel.

3.Select Setup > Network.

4.Select the HP Velocity tab.

5.Select the operational mode (Figure 5).

HP Velocity User Guide 9