HP Projer TC33096003 manual Libraries missing from Linux distribution

cat /proc/cmdline

5.If hda=ide-scsi (or similar) does not appear, you did not update the configuration file correctly. Start over with step 1 above.

6.Verify that your system detects the tape device, using the following command:

cat /proc/scsi/scsi

Libraries missing from Linux distribution

Problem:

I cannot launch the X Window System version of Data Protector Express. It gives me the following message:

error while loading shared libraries libstdc++.so.5

Cause: Either the libstdc++ library is missing from your version of Linux distribution or the wrong version of the library is installed.

Solution: Install the missing library.

1.Identify the required version of the library:

a.Navigate to the Data Protector Express directory in a terminal window. The default directory is /usr/local/hp/dpx.

b.Type lld dpadmin.bin from the command prompt and press Enter. A list of libraries required for Data Protector Express appears.

The name of the missing libstdc++ library will be similar to libstdc++.so.5.

2.Contact your Linux distributor for the missing library.

NOTE:

If you are using RedHat Linux EL 4, you can use an RPM package called "compat-libstdc++.rpm" to install the necessary library.

3.Install the library according to the documentation provided by your distributor.

4.Try to launch the X Window System version of Data Protector Express. It should work properly.

Installation Guide 15