8
LASERJET M1530 MFP SERIES
EN Windows network installation
1.With the product turned off, connect the network cable to the product, turn on the product, and wait for one minute.
. Press the Setup button. Use the arrow buttons to select Reports, and then press OK.
3.Use the arrow buttons to select Config report, and then press OK. Locate the product IP address on the page that prints in order to confirm that the product is connected to the network.
4.Insert the CD and follow the onscreen instructions to install the software. If the installation program does not start automatically, browse the computer and double- click the Setup.exe file on the CD. When prompted, type the IP address from the configuration page in the installer program screen.
FR Installation en réseau sous Windows
1.Connectez le produit hors tension au câble réseau. Ensuite, mettez le produit sous tension et patientez pendant une minute.
. Appuyez sur le bouton Configuration . Sélectionnez Rapports à l'aide des flèches, puis appuyez sur OK.
3.Sélectionnez Rapport de configuration à l'aide des flèches, puis appuyez sur OK. Recherchez l'adresse IP du produit sur la page imprimée afin de vérifier que le produit est connecté au réseau.
4.Pour installer le logiciel, insérez le CD et suivez les instructions à l'écran. Si le programme d'installation ne démarre pas automatiquement, parcourez l'ordinateur et cliquez deux fois sur le fichier Setup.exe du CD. Lorsque vous y êtes invité, saisissez l'adresse IP dans l'écran du programme d'installation en vous reportant à la page de configuration.