Sub-channels, Media Access Protocol, Models, Roaming

	infrastructure products through the Cisco Compatible Extensions Program
	Version 4) with Microsoft Windows Vista and XP only.
Sub-channels	Multinational support with frequency bands and channels compliant to local
	regulations.
Media Access Protocol	CSMA/CA (Collision Avoidance) with ACK
Network Architecture	Ad-hoc (Peer to Peer)
Models	Infrastructure (Access Point Required)
Roaming	IEEE 802.11 compliant roaming between access points
Output Power (for CCK)2	15 dBm

Output Power (for OFDM; 15 dBm power varies by data

rate)2
Power Consumption	Transmit: 2.3 Watts (average, with one spatial streams)
	Receive: 1.9 Watts (average with two receive chains)
	Idle mode3: 30 mW (average)
	Radio off: 20 mW (max)
Power Management	ACPI compliant power management
	802.11 compliant power saving mode
Receiver Sensitivity4	300 Mbps: -68 dBm, 54 Mbps: -74 dBm, 6 Mbps: -90 dBm
Antenna Connections	3 U.FL type connectors, 50 ohm nominal impedance
Form Factor	PCI-Express Half-MiniCard
Weight	0.013 lb (6 g)
Dimensions	0.19 x 1.06 x 1.18 in (4.75 x 26.8 x 30 mm)
Operating Voltage	3.3V +/- 9%, 1.5V +/- 5%
Temperature	Operating	32° to 176° F (0° to 80° C)
	Non-operating	–40° to 176° F (–40° to 80° C)
Humidity	Operating	10% to 90% (non-condensing)
	Non-operating	5% to 90% (non-condensing)
Altitude	Operating	0 to 10,000 ft (3,048 m)
	Non-operating	0 to 50,000 ft (15,240 m)
Configuration Utility5	Microsoft Windows XP

	Choice of Configuration Utility:
	Microsoft Windows XP Wireless Network Connection Manager
	Intel PROSet for Microsoft Windows XP (required for Cisco Compatible
	Extensions support)
	Microsoft Windows Vista
	Microsoft Windows Vista Wireless Network Connection Manager.
	Intel IHV extensions for Windows Vista available to support Cisco
	Compatible Extensions.
LED Activity	LED Off – Radio OFF; Solid LED On – Radio ON

1.Check latest software/driver release for updates on supported security features.

2.Maximum output power may vary by country according to local regulations.

3.In Power Save Polling mode and on battery power.

4.Receiver sensitivity is measured at a packet error rate of 8% for 802.11b (CCK modulation) and a

Page 21

Sub-channels