HP 530 manual TouchPad cable

TouchPad cable

Description	Spare part number
TouchPad cable	441638-001

Before removing the TouchPad cable, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see Battery on page 32).

5. Remove the following components:

a. Hard drive (see Hard drive on page 33)

b. Memory/WLAN module compartment cover (see Memory module on page 35)

c. Optical drive (see Optical drive on page 39)

d. Switch cover (see Switch cover on page 41)

e. Keyboard (see Keyboard on page 43)

f. Display assembly (see Display assembly on page 47)

g. Base enclosure (see Base enclosure on page 52)

h. Fan assembly (see Fan assembly on page 55)

i. Heat sink (see Heat sink on page 57)

j. System board (see System board on page 62)

Remove the TouchPad cable:

1. Position the top cover with the front toward you.

Component replacement procedures 67