HP CQ58 manual Enww

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 39), and then remove the following components:

●WLAN module (see WLAN module on page 48)

●Hard drive (see Hard drive on page 53)

●Keyboard (see Keyboard on page 58)

●Top cover (see Top cover on page 61)

●Speakers (see Speakers on page 69)

●USB board (see USB board on page 71)

●Power connector cable (see Power connector cable on page 73)

●Display assembly (see Display assembly on page 75)

●System board (see System board on page 84)

●Fan/heat sink assembly (see Fan/heat sink assembly on page 90)

To remove the processor:

1.Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn counterclockwise (2) until you hear a click.

ENWW Component replacement procedures 97