HP A6X41UAR#ABA manual Restore, Creating restore media

Page 46

Restore

In the event of hard drive failure, to restore your system to its factory image you will need a set of recovery discs or a recovery flash drive that you can create using HP Recovery Manager. HP recommends that you use this software to create either a set of recovery discs or a recovery flash drive immediately after software setup.

If for some other reason you need to restore your system, this can be achieved using the HP Recovery partition (select models only), without the need for recovery discs or a recovery flash drive. To check for the presence of a recovery partition, click Start, right-click Computer, click Manage, and then click Disk Management. If the recovery partition is present, a Recovery drive is listed in the window.

CAUTION: HP Recovery Manager (partition or discs/flash drive) restores only software that was preinstalled at the factory. Software not provided with this computer must be reinstalled manually.

NOTE: Recovery discs have been included if your computer does not have a recovery partition.

Creating restore media

HP recommends that you create either a set of recovery discs or a recovery flash drive to be sure that you can restore your computer to its original factory state if the hard drive fails, or if for any reason you cannot restore using the recovery partition tools. Create these discs or the flash drive after setting up the computer for the first time.

NOTE: HP Recovery Manager allows the creation of only one set of recovery discs or one recovery flash drive. Handle these discs or flash drive carefully and keep them in a safe place.

NOTE: If your computer does not include an integrated optical drive, you can use an optional external optical drive (purchased separately) to create recovery discs, or you can purchase recovery discs for your computer from the HP Web site. If you use an external optical drive, it must be connected directly to a USB port on the computer, not to a USB port on an external device, such as a USB hub.

Guidelines:

●Purchase high-quality DVD-R, DVD+R, DVD-R DL, or DVD+R DL discs.

NOTE: Read-write discs, such as CD-RW, DVD±RW, double-layer DVD±RW, and BD-RE (rewritable Blu-ray) discs, are not compatible with the HP Recovery Manager software.

●The computer must be connected to AC power during this process.

●Only one set of recovery discs or one recovery flash drive can be created per computer.

NOTE: If you are creating recovery discs, number each disc before inserting it into the optical drive.

●If necessary, you can exit the program before you have finished creating the recovery discs or recovery flash drive. The next time you open HP Recovery Manager, you will be prompted to continue the backup creation process.

38 Chapter 7 Backup and recovery

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Getting Started Product notice Software termsSafety warning notice Iv Safety warning notice Table of contents Contacting customer support Labels Vii Viii Welcome Whats new? Finding informationBeats Audio Whats new?IconDescription Resource Finding informationSelect Start Help and Support User Guides Resource Contents TouchPad Getting to know your computerTop Component DescriptionLights Buttons Or refer to the HP Notebook Reference Guide Keys Fn keyFront Component Description Speakers Produce soundRegulatory, Safety and Environmental Notices Right sideLeft side GuideDisplay Communication and Chat CyberLink YouCamBottom HP QuickWeb select models only Getting startedStarting HP QuickWeb Button BehaviorNetworking Using an Internet service provider ISP Connecting to a wireless networkConnecting to an existing Wlan Setting up a new Wlan networkConfiguring a wireless router Keyboard and pointing devices Identifying the hotkeys Using the keyboardUsing the action keys Hotkey combination DescriptionIcon Key Description Setting pointing device preferences Using pointing devicesUsing the TouchPad Turning the TouchPad off and on TouchPad light Icon DescriptionSelecting Scrolling Maintenance Inserting the battery Inserting or removing the batteryRemoving the battery Page Replacing or upgrading the hard drive Removing the hard driveInstalling a hard drive Page Remove the service door see Removing the hard drive on Adding or replacing memory modulesPage Replace the service door see Installing a hard drive on Backup and recovery Restore Creating restore mediaPerforming a system restore Restoring using the restore media Backing up and recovering your information Changing the computer boot orderUsing Windows Backup and Restore Using Windows system restore points When to create restore pointsCustomer support Contacting customer support Labels ComponentSpecifications Input power DC plug of external HP power supplyOperating environment Index LabelsHdmi USB
Top Page Image Contents