HP 1103130NR manual Display assembly, DescriptionSpare part number

Display assembly

DescriptionSpare part number

10.1-in display assembly (includes display panel cable, 2 WLAN transceivers and cables, 2 WWAN transceivers and cables, and webcam/microphone module and cable):

● 10.1-in, WSVGA, AntiGlare, standard display assembly in black	607744-001
● 10.1-in, WSVGA, AntiGlare, standard display assembly in white	607745-001
● 10.1-in, WSVGA, Anti-Glare, standard display assembly in black	607746-001
● 10.1-in, WSVGA, standard display assembly in black	619469-001
● 10.1-in, WSVGA, standard display assembly in black	619470-001
● 10.1-in, WSVGA, Anti-Glare, standard display assembly in black	618875-001
● 10.1-in, WSVGA, AntiGlare display panel non-PMMA in red	622656-001
● 10.1-in, WSVGA, AntiGlare display panel non-PMMA with WWAN, in blue	622657-001
● 10.1-in, WSVGA, AntiGlare display panel non-PMMA with WWAN, in red	622658-001
● 10.1-in, WSVGA, AntiGlare display panel non-PMMA with WWAN, in blue	622559–001

Before removing the display assembly, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 38).

5.Remove the service cover (see Service cover on page 40).

6.Disconnect the WWAN antenna cables from the WWAN module (see WWAN module on page 43).

7.Disconnect the WLAN antenna cables from the WLAN module (see WLAN module on page 46).

8.Remove the keyboard (see Keyboard on page 54).

9.Remove the top cover (see Top cover on page 57).

Remove the display assembly:

1.Close the computer.

2.Turn the computer upside down, with the front toward you.

64 Chapter 4 Removal and replacement procedures