HP 2102 WH239UT 10.1' Netbook WH239UT#ABA manual Using the Disaster Recovery Utility

Page 93

Using the Disaster Recovery Utility

NOTE: To perform a recovery with Disaster Recovery, you need a USB flash drive (purchased separately). For optimum performance, the capacity of the drive should be no larger than 2 GB.

Disaster Recovery recovers data from a Disaster Recovery Set that you previously created with Roxio BackOnTrack. Disaster Recovery is available from the HP Web site in a compressed file called a SoftPaq.

NOTE: Running the SoftPaq makes the USB drive bootable.

Before performing a disaster recovery, you must download the Disaster Recovery utility and extract it to a USB flash drive.

Downloading and extracting the Disaster Recovery utility

To download and extract Disaster Recovery, follow these steps:

1.Connect a bootable USB flash drive or external drive to a USB port on your computer.

2.Open your Web browser, go to http://www.hp.com/support, and select your country or region.

3.Enter the SoftPaq number SP42226 in the Search box, press enter, and then follow the on-screen instructions.

4.Click Download only to save the file to your computer.

5.When prompted, click Save, and then select the external drive from the list of storage locations.

6.After the file is downloaded, navigate to the USB flash drive or external drive, and then double- click the SoftPaq file to format the USB flash drive and extract the Disaster Recovery files.

7.If prompted to do so, restart your computer after the installation is complete.

Restoring your hard drive image

To restore your hard drive image using Disaster Recovery, follow these steps:

1.Connect the external hard drive containing the Disaster Recovery Set to your computer.

2.Connect the bootable USB flash drive containing the extracted Disaster Recovery utility to a USB port on your computer.

3.Change the boot device order by turning on or restarting the computer, and then pressing f9.

4.Use the arrow keys to select the USB flash drive, and then press enter.

5.At the Roxio BackOnTrack Disaster Recovery screen, select Disaster Recovery, and then click Next.

6.Browse to the external hard drive containing the Disaster Recovery Set, and then click Next.

7.Click Next to proceed with the recovery. This process may take several minutes.

8.After a message on the screen reports a successful recovery, click Finish.

Windows XP

85

Image 93

Contents HP Mini 2102, HP Mini 210, and Compaq Mini Page Safety warning notice Iv Safety warning notice Table of contents Setup Utility Power cord set requirements Viii Product description Hard drives Category Description HP Mini Compaq Mini 210Optical drive Diskette driveExternal media Category Description HP Mini Compaq Mini 210 WirelessCards Internal mediaServiceability End-user replaceable parts PowerRequirements SecurityIdentifying the hardware External component identificationTouchPad Top componentsComponent Description Printers and Other Hardware MouseLights Front components KeysComponent Description Speakers Produce sound Maintenance Power Options Right-side componentsSelect Start Control Panel Performance Left-side components Display components Bottom components Wireless antennas Serial number label location Illustrated parts catalogItem Description Spare part number Computer major componentsDescription Spare part number Computer major components Illustrated parts catalog Power connector cable RTC batteryWlan module Battery Service coverHP un2400 Mobile Broadband Wwan module Display panel Display assembly componentsDisplay Rubber Kit not illustrated Display Screw Kit not illustratedDescription Spare part number Hard drive Mass storage devicesHard Drive Hardware Kit not illustrated External optical driveMiscellaneous parts Power cordUMA AC adapter , non-smart RC/V 2W HD video decoderSpare part number Description Sequential part number listing589659-001 Sequential part number listing Microphone module and cable Sequential part number listing Cable Sequential part number listing Preliminary replacement requirements Removal and replacement proceduresService considerations Tools requiredCables and connectors Electrostatic discharge damage Grounding guidelinesPackaging and transporting guidelines Material Use Voltage protection level Equipment guidelinesComputer feet Component replacement proceduresBattery SIM Service cover Page Page Hard drive Page Wwan module Page Wlan module Page Memory module Page Description Spare part number RTC battery 599516-001 RTC batteryFor use Spare part Spare part number Number KeyboardFor use Spare part Spare part number Number Page Page Top cover Page Page Speakers Page Display assembly Page Page System board Page Page Fan/heat sink assembly Page Power connector cable Page Starting Setup Utility Setup UtilityUsing Setup Utility Changing the language of Setup UtilityRestoring default settings in Setup Utility Navigating and selecting in Setup UtilityDisplaying system information Setup Utility Menus Exiting Setup UtilityMain Menu Security MenuDiagnostics Menu System Configuration MenuBackup and recovery Windows only Backing up and recovering using Roxio BackOnTrackWindows Creating a copy of the hard drive Using the Disaster Recovery utility Using Windows Backup and Restore Using the Instant Restore utilityWhen to create restore points Using system restore pointsBacking up your information Backing up and recovering using HP Recovery ManagerCreating a set of recovery discs Recovering using the recovery discs Performing a recoveryBacking up your information Windows XPCreating a copy of the hard drive Using the Disaster Recovery Utility Using the Instant Restore utility Pin Signal Connector pin assignmentsAudio-in microphone Audio-out headphoneExternal monitor Universal Serial Bus RJ-45 networkRequirements for all countries Power cord set requirementsCountry/region Accredited agency Applicable note number Requirements for specific countries and regionsBattery RecyclingDisplay Page Page Page Page Page Index Memory test Plastic parts