2.Remove the RTC battery (2) from the socket on the system board.
Reverse this procedure to install the RTC battery. When installing the RTC battery, be sure the “+” sign faces up.
Hard drive
NOTE: The hard drive bracket is included in the Hard Drive Hardware Kit, spare part number
Description | Spare part number | |
|
| |
Hard drive: |
| |
|
|
|
500 | GB, 9.5 mm (0.37 in) × 6.35 cm (2.50 in), parallel SATA, | |
|
|
|
320 | GB, 9.5 mm (0.37 in) × 6.35 cm (2.50 in), parallel SATA, | |
|
|
|
250 | GB, 9.5 mm (0.37 in) × 6.35 cm (2.50 in), parallel SATA, | |
|
|
|
320 | GB, 7.0 mm mm (0.28 in) × 6.35 cm (2.50 in), parallel SATA, 5400 rpm | |
|
|
|
250 | GB, 7.0 mm (0.28 in) × 6.35 cm (2.50 in), parallel SATA, 5400 rpm | |
|
| |
Hard Drive Hardware Kit | ||
|
|
|
Before removing the hard drive, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
Component replacement procedures 45