HP E4S13UA#ABA Initiating and exiting Sleep, Enabling and exiting user-initiated hibernation

NOTE: Rapid Start Technology can be disabled in Setup Utility (BIOS). If you want to be able to initiate the Hibernation state, you must enable user-initiated Hibernation using Power Options. See Enabling and exiting user-initiated hibernation on page 44.

Initiating and exiting Sleep

With the computer on, you can initiate Sleep in the following ways:

●Briefly press the power button.

●

Swipe from the right edge of the TouchPad or touch screen (select models only) to

display the charms, tap Settings, tap the Power icon, and then tap Sleep.

– or –

From the Start screen, point to the upper-right or lower-right corner of the screen. When

the charms list opens, click Settings, click the Power icon, and then click Sleep.

To exit Sleep:

●Press the Windows logo key.

●Briefly press the power button.

●If the display is closed, and the tablet is connected to the keyboard dock, open the display.

●Press a key on the keyboard.

●Tap or swipe the TouchPad.

When the computer exits Sleep, the power lights turn on and the computer returns to the screen where you stopped working.

NOTE: If you have set a password to be required on wakeup, you must enter your Windows password before the computer will return to the screen.

Enabling and exiting user-initiated hibernation

You can enable user-initiated Hibernation and change other power settings and timeouts using Power Options.

1.From the Start screen, type power, select Settings, and then select Power Options from the list of applications.

2.In the left pane, click Choose what the power button does.

3.Click Change Settings that are currently unavailable.

4.In the When I press the power button area, select Hibernate.

5.Click Save changes.

To exit Hibernation, briefly press the power button. The power lights turn on and your work returns to the screen where you stopped working.

44 Chapter 6 Managing power