USB board
Description | Spare part number |
|
|
USB board |
|
|
|
Before removing the USB board, remove the following components:
1.Battery (see Battery on page 37)
2.Service access cover (see Service access cover on page 38)
3.Hard drive (see Hard drive on page 39)
4.Optical drive (see Optical drive on page 41)
5.Keyboard (see Keyboard on page 47)
6.Top cover (see Top cover on page 49)
Remove the USB board:
1.Position the computer
2.Release the clips (1) that secure the USB board to the base enclosure.
3.Lift the USB board (2) straight up to remove it from the computer.
Reverse this procedure to install the USB board.
56 Chapter 4 Removal and replacement procedures