HP s dx5150 manual Optical Drive Precautions, Operation, Cleaning

Page 50

Computer Operating Guidelines, Routine Care and Shipping Preparation

Install or enable power management functions of the operating system or other software, including sleep states.

Turn off the computer before you do either of the following:

Wipe the exterior of the computer with a soft, damp cloth as needed. Using cleaning products may discolor or damage the finish.

Occasionally clean the air vents on all vented sides of the computer. Lint, dust, and other foreign matter can block the vents and limit the airflow.

Optical Drive Precautions

Be sure to observe the following guidelines while operating or cleaning the optical drive.

Operation

Do not move the drive during operation. This may cause it to malfunction during reading.

Avoid exposing the drive to sudden changes in temperature, as condensation may form inside the unit. If the temperature suddenly changes while the drive is on, wait at least one hour before you turn off the power. If you operate the unit immediately, it may malfunction while reading.

Avoid placing the drive in a location that is subject to high humidity, extreme temperatures, mechanical vibration, or direct sunlight.

Cleaning

Clean the panel and controls with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution. Never spray cleaning fluids directly on the unit.

Avoid using any type of solvent, such as alcohol or benzene, which may damage the finish.

E–2

www.hp.com

Hardware Reference Guide

Image 50
Contents Hardware Reference Guide Hardware Reference Guide HP Business Desktops Contents Index Product Features Standard Configuration FeaturesFront Panel Components Front Panel ComponentsRear Panel Components Rear Panel ComponentsStandard Keyboard Components Caps Lock, and Scroll LockOptional HP Modular Keyboard Special Mouse FunctionsSerial Number Location Product Features Hardware Upgrades Serviceability FeaturesRemoving the Computer Access Panel and Front Bezel Removing the Computer Access Panel Removing the Front Bezel DDR-SDRAM DIMMs Installing Additional MemoryDIMMs Dimm Sockets Description Socket Color Installing DDR-SDRAM DIMMs Installing a Dimm Removing or Installing an Expansion Card Remove the screw on the slot cover retention latch Removing the Expansion Slot Cover Installing an Expansion Card Removing an Expansion Card Removing an Expansion Card from a Standard Expansion Socket Replacing or Upgrading a Drive Locating Drive PositionsRemoving a Drive Hardware Upgrades Removing the Drives Replacing a Drive Sliding the Drives into the Drive Cage Reconnecting the Optical Drive Cables Hardware Upgrades Hard Drive Connector Location Configuring the Sata Hard Drive Reassembling the Computer Replacing the Side Access Panel Reconnecting the Power Cable Specifications HP dx5150 MicrotowerInput Voltage Switch Setting Battery Replacement Type Type Replacing a Coin Cell Battery Type Installing a Security Lock Security Lock ProvisionsInstalling a Padlock Grounding Methods Electrostatic DischargePreventing Electrostatic Damage Electrostatic Discharge Computer Operating Guidelines and Routine Care Operation Optical Drive PrecautionsCleaning Safety Shipping PreparationHardware Reference Guide Index Sata