HP 8540W manual Material Usage

QuickSpecs

HP EliteBook 8540w Mobile Workstation

Technical Specifications

This product is in compliance with California Proposition 65 (State of

California; Safe Drinking Water and Toxic Enforcement Act of 1986).

This product is in compliance with the IEEE 1680 (EPEAT) standard at the

Gold level, see: www.epeat.net

Plastics parts weighing over 25 grams used in the product are marked per

ISO 11469 and ISO1043.

	This product contains 0% post consumer recycled plastic (by wt.)
	This product is greater than 90% recycle-able when properly disposed of at
	end of life.
	Packaging Materials
	External:
	Paper 97 g
	Internal:
	Polyethylene low density solid 13 g
	Molded Pulp 100 g
	Polyethylene low density 4 g
	The paper material is made from 80% recycled content.
	The Polyethylene low density solid is made from 100% recycled
	content.
	The Molded Pulp is made from 80% recycled content.
	The Polyethylene low density material is made from 100% recycled
	content.
	HP follows these guidelines to decrease the environmental impact of product
	packaging:
	Eliminate the use of heavy metals such as lead, chromium, mercury
	and cadmium in packaging materials.
	Eliminate the use of ozone-depleting substances (ODS) in packaging
	materials.
	Design packaging materials for ease of disassembly.
	Maximize the use of post-consumer recycled content materials in
	packaging materials.
	Use readily recyclable packaging materials such as paper and
	corrugated materials.
	Reduce size and weight of packages to improve transportation fuel
	efficiency.
	Plastic packaging materials are marked according to ISO 11469 and
	DIN 6120 standards.
Material Usage	This product does not contain any of the following substances in excess of
	regulatory limits (for reference of these limits please refer to the HP General
	Specification of the Environment:
	(http://www.hp.com/hpinfo/globalcitizenship/environment/supplychain/
	gen_specifications.html):
	Asbestos

DA - 13529 Canada — Version 20 — November 23, 2010 Page 38