HP 6930p manual Enabled, DBPSK, DQPSK, CCK, OFDM, BPSK, QPSK, 16-QAM, 64-QAM

QuickSpecs

HP EliteBook 6930p Notebook PC

Technical Specifications

	* The specifications for 802.11n draft 2.0 are draft specifications and are
	not final. If the final specifications differ from the draft specifications, it may
	affect the ability of the notebook to communicate with other 802.11n WLAN
	devices. In countries where n draft 2.0 is not allowed, this capability is not
	enabled.
Interoperability	Wi-Fi certified (802.11abg only)
	Cisco Compatible Extensions Program compliant (802.11abg only) with
	Microsoft Windows Vista and XP (details at:
	http://www.hp.com/go/notebooks/WLAN)
	Tested with wireless access points from several major manufacturers
	(details at: http://www.hp.com/go/notebooks/WLAN/draft-n)
Frequency Band	2.4 GHz and 5 GHz
Antenna Structure	3 transmit; 3 receive (3x3)
Data Rates	802.11b: 1, 2, 5.5, 11 Mbps
	802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
	802.11n (draft): 66 possible data rates, ranging from 6 Mbps to 450
	Mbps, depending on the combination of Bandwidth, Modulation Coding
	Scheme, and Guard Interval used, as defined in IEEE 802.11n (draft)
	specification
Modulation	Direct Sequence Spread Spectrum
	DBPSK, DQPSK, CCK, OFDM, BPSK, QPSK, 16-QAM, 64-QAM
Security1	Supports 64- and 128-bit WEP, WPA, WPA2, hardware-accelerated AES
	(support for key sizes of 128, 192, and 256 bits), 802.1x authentication
	types EAP-TLS, EAP-TTLS, PEAP-GTC, PEAP-MSCHAPv2, LEAP, EAP-FAST.
	Support for Cisco Security Features (proven compatibility with Cisco Aironet
	infrastructure products through the Cisco Compatible Extensions Program
	Version 4) with Microsoft Windows Vista and XP only.
Sub-channels	Multinational support with frequency bands and channels compliant to local
	regulations.
Media Access Protocol CSMA/CA (Collision Avoidance) with ACK
Network Architecture	Ad-hoc (Peer to Peer)
Models	Infrastructure (Access Point Required)
Roaming	IEEE 802.11 compliant roaming between access points
Output Power (for CCK)215 dBm
Output Power (for OFDM;15 dBm
power varies by data
rate)2
Power Consumption	Transmit: 2.3 Watts (average, with three spatial streams)
	Receive: 1.9 Watts (average with three receive chains)
	Idle mode3: 30 mW (average)
	Radio off: 20 mW (max)
Power Management	ACPI compliant power management
	802.11 compliant power saving mode
Receiver Sensitivity4	300 Mbps: -68 dBm, 54 Mbps: -74 dBm, 6 Mbps: -90 dBm
Antenna Connections	3 U.FL type connectors, 50 ohm nominal impedance
Range	802.11 a – Typical	600 feet – Outdoor Open Area
	(@6 Mbps)	150 feet – Indoor, Office environment

DA - 13061 Worldwide QuickSpecs — Version 8 — 10.10.2008 Page 33