HP G42, CQ42 manual Hard drive

Hard drive

NOTE: All hard drive spare part kits include a hard drive bracket.

Description	Spare part number
640-GB 5400 RPM	615808-001
500-GB 7200 RPM	600170-001
320-GB 7200 RPM	600169-001
250-GB 7200 RPM	575598-001
160-GB 7200 RPM	600167-001
Hard drive hardware kit (includes screws and hard drive bracket)	600191-001
Hard drive cable/adaptor (included in the cable kit)	610791–001

Before removing the hard drive, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 45).

Remove the hard drive:

1.Position the computer with the front toward you.

2.Remove the two Phillips PM2.5×5.0 screws (1) that secure the hard drive cover to the computer.

46 Chapter 4 Removal and replacement procedures