HP A7V8X-MXSE manual Standard Memory, Optional Memory, Memory Upgrades

QuickSpecs

HP ProBook 4710s Notebook PC

Memory

800 MHz DDR2 SDRAM

Two DIMM slots supporting dual channel memory DIMM sizes supported: 1024 MB and 2048 MB

Standard Memory	1024 MB (1024 MB x 1)
	2048 MB (2048 MB x 1 or 1024 MB x 2)
	3072 MB (2048 MB x 1024 MB)
	4096 MB (2048 MB x 2)
Optional Memory	Support for up to 8192 MB of memory with the installation of optional DDR2 SDRAM memory kits. Both
Upgrades	memory slots are user accessible. Please refer to the Hardware and Software Guide for installation
	procedures. Maximized dual-channel performance requires SODIMMs of the same size and speed in
	both memory slots.
Up to		Slot 1	Slot 2
1024 MB		1024 MB	Empty
2048 MB		1024 MB	1024 MB
3072 MB		2048 MB	1024 MB
4096 MB		2048 MB	2048 MB
8192 MB		4096 MB	4096 MB

NOTE: This chart does not represent all possible memory configurations. Due to the non-industry standard nature of some third- party memory modules, we strongly recommend using only HP branded memory modules to ensure compatibility. If you mix memory speeds, the system will perform at the lower memory speed. Full availability of 4 GB or more of memory requires Windows Vista Business 64-bit or Linux. With Windows 32-bit operating systems, the amount of usable memory is dependent upon your configuration, so that above 3 GB all memory may not be available due to system resource requirements.

Memory Upgrades	HP 1 GB (DDR2 800 MHz) SODIMM	KT292AA
	HP 2 GB (DDR2 800 MHz) SODIMM	KT293AA
	HP 4 GB (DDR2 800 MHz) SODIMM	KT294AA

DA - 13252 North America — Version 4 — May 15, 2009 Page 13