HP 6830s manual Security

QuickSpecs

HP Compaq 6830s Notebook PC

Technical Specifications

1.Check latest software/driver release for updates on supported security features.

2.Maximum output power may vary by country according to local regulations.

3.Receiver sensitivity is measured at a packet error rate of 8% for 802.11b (CCK modulation) and a packet error rate of 10% for 802.11a/g (OFDM modulation).

4.WLAN supplier's client utility is required for Cisco Compatible Extensions support with Microsoft Windows XP. WLAN may also be compatible with certain third-party software supplicants. WLAN supplier IHV extensions required for Cisco Compatible Extensions support for Microsoft Windows Vista.

Broadcom 4311AG	Wireless LAN StandardsIEEE 802.11a
802.11a/b/g WiFi		IEEE 802.11b
Adapter		IEEE 802.11g
	Interoperability	Wi-Fi certified (802.11abg only)
		Cisco Compatible Extensions Program compliant (802.11abg only) with
		Microsoft Windows Vista and XP (details at:
		http://www.hp.com/go/notebooks/WLAN)
		Tested with wireless access points from several major manufacturers
		(details at: http://www.hp.com/go/notebooks/WLAN/draft-n)
	Frequency Band	2.4 GHz and 5 GHz
	Data Rates	802.11b: 1, 2, 5.5, 11 Mbps
		802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
	Modulation	Direct Sequence Spread Spectrum
		DBPSK, DQPSK, CCK, OFDM
	Security1	Supports 64- and 128-bit WEP, WPA, WPA2, hardware-accelerated AES,
		802.1x authentication types EAP-TLS, EAP-TTLS, PEAP-GTC, PEAP-
		MSCHAPv2, LEAP, EAP-FAST.
		Support for Cisco Security Features (proven compatibility with Cisco Aironet
		infrastructure products through the Cisco Compatible Extensions Program
		Version 4) with Microsoft Windows Vista and XP only.
	Sub-channels	Multinational support with frequency bands and channels compliant to local
		regulations.
	Media Access Protocol CSMA/CA (Collision Avoidance) with ACK
	Network Architecture	Ad-hoc (Peer to Peer)
	Models	Infrastructure (Access Point Required)
	Roaming	IEEE 802.11 compliant roaming between access points
	Output Power (for CCK)217.5 dBm
	Output Power (for OFDM;15 dBm
	power varies by data
	rate)2
	Power Consumption	Idle associated: 350 mW
		Idle unassociated: 350 mW
		Transmit: 2.0 W (max)
		Receive: 1.5 W (max)
	Power Management	ACPI compliant power management
		802.11 compliant power saving mode
	Receiver Sensitivity4	54 Mbps: -72 dBm, 11 Mbps: -85 dBm , 1 Mbps: -95 dBm

DA - 13057 Worldwide QuickSpecs — Version 2 — 7.15.2008 Page 27