Display assembly
All display assemblies include WLAN antenna transceivers and cables. WWAN models include 2 WWAN antenna transceivers and cables.
Description | Spare part number |
|
|
Display assembly, | |
|
|
Before removing the display assembly, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 31).
5.Remove the following components:
a.Bottom door (see Bottom door on page 33).
b.WLAN module (see WLAN/Bluetooth combo card on page 43)
c.WWAN module (see WWAN module on page 41)
d.Keyboard (see Keyboard on page 45)
e.Top cover (see Top cover on page 47)
f.Speakers (see Speaker assembly on page 59)
Remove the display assembly:
1.Position the computer upside down.
2.Remove the WLAN and WWAN antennas from the routing path (1) on the bottom of the computer.
Component replacement procedures 69