HP 512 manual Rule pattern=911 display=911 restrict=VoIP

number is and will also indicate that this number should be placed on the cellular network only. The emergency dialing rule for the U.S is shown below:

<rule pattern='911' display='911' restrict='VoIP' />

The base template for the VoIP Dial Plan is specified below. It is HIGHLY RECOMMENDED that the rules included in the base template should not be removed.

<wap-provisioningdoc>

<characteristic type="VoIP">

<parm name="DialPlan" value="<dialplan xmlns='http://schemas.microsoft.com/embedded/VoIP'>

<dialplan-header> <host>#use_sipsrv_host_name#</host>

</dialplan-header>

<!-- Dial Plan rules -->

<!-- IP address rules -->

<!-- EQUIVALENT OF '\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}' -->

<rule pattern='(\d\d\d\d\d\d)\.(\d\d\d\d\d\d)\.(\d\d\d\d\d\d)\.(\d\d\d\d\d\d)' restrict='Cell,SMS' /> <!-- EQUIVALENT OF '(\d{1,3})\*(\d{1,3})\*(\d{1,3})\*(\d{1,3})' -->

<rule pattern='(\d\d\d\d\d\d)\*(\d\d\d\d\d\d)\*(\d\d\d\d\d\d)\*(\d\d\d\d\d\d)' dial='\1.\2.\3.\4' display='\1.\2.\3.\4' restrict='Cell,SMS' />

<!—Add Emergency Dialing Rules here --> <!—Add Other Dialing Rules here -->

<!-- SIP URI rules -->

<!-- EQUIVALENT OF '[Ss][Ii][Pp][Ss]?:\w*(\d{3})(\d{3})(\d{4})@(.+)' -->

<rule pattern='[Ss][Ii][Pp][Ss]?:\w*(\d\d\d)(\d\d\d)(\d\d\d\d)@(.+)' display='(\1) \2-\3' restrict='Cell,SMS' />

<rule pattern='([Ss][Ii][Pp][Ss]?:)?\w*([a-zA-Z0-9_-]+)@(.+)' display='\2' restrict='Cell,SMS' /> <rule pattern='[Ss][Ii][Pp][Ss]?:\w*([^@]+)' display='\1' restrict='Cell,SMS' />

<!—Catch All -->

<rule pattern='(\d+)' dial='sip:\1@$host$' display='\1' transfer='sip:\1@$host$' />

<rule pattern='([a-zA-Z0-9_-]+)' dial='sip:\1@$host$' display='\1' transfer='sip:\1@$host$' />

</dialplan>" /> </characteristic>

</wap-provisioningdoc>

A sample dialing rule for 10-digit phone numbers is shown below. This rule pre-pends a ‘9’ to 10-digit dialed phone numbers.

<rule pattern='(\d{3})\s*(\d{3})\s*-?\s*(\d{4})(\s*[Xx]\s*\d+)?' dial='sip:9\1\2\3@$host$' display='(\1) \2-\3'