HP f310 Car manual Setting the Universal Time Code UTC

Note:

1.When the battery is drained dry and the satellite synchronization is off , the user must reset the date/time before the function -automatic record is started. If the user doesn't reset the date/time, the device will give you alert after one minutes and the automatic record will be started .

2.But if the satellite synchronized ,the device can do automatic record immediately.

2.5.3Setting the Universal Time Code (UTC)

Depending on your location, you may need to change the current UTC setting of the camcorder so that the correct date and time are updated when a GPS signal is detected.

1.If recording is in progress, press thebutton to stop recording.

2.Press the button to open the OSD menu.

3.	Use the	or	buttons to navigate to the Satellite
	Synchronization option and press the OK button. Ensure that the
	On setting is selected and press the OK button again to view the
	UTC setting.
4.	Refer to the UTC Map below and use the			or
	button to select the desired setting and press the OK button to
	confirm the setting.
5.	Press the	button to exit the menu.