CE Regulatory Notice

This equipment complies with the requirements set out in the Council Directives on the Approximation of the Laws of the Member States relating Electromagnetic Compatibility (2004/108/EC); the Low Voltage Directive (2006/95/EC); the Restriction of The Use of Certain Hazardous Substances in Electrical And Electronic Equipment Directive (2002/95/EC), Turkish EEE Directive; the Commission Regulation (EC) No 1275/2008 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to eco-design requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment, and the Directive 2009/125/EC of the European parliament and of the council establishing a framework for the setting of eco-design requirements for energy-related products.

Notes on Installation

1.Install the device near the rear-view mirror to obtain the best open-field view. Do NOT install the camcorder in a location that will obstruct your required driving view.

2.Make sure that the lens is within the wiping range of the windscreen wiper to ensure a clear view even when it rains.

3.Do not touch the lens with your fingers. Finger grease may be left on the lens and will result in unclear videos or snapshots. Clean the lens on a regular basis.

4.Do not install the device on a tinted window. Doing so may damage the tint film.

5.Make sure that the installation position is not hindered by the tinted window.

Caution

Use the authorized charger only.

Never disassemble or attempt repair of this product. Doing so may damage the camcorder, cause electric shock and void your product warranty.

Never short-circuit the battery.

Exposing the camcorder to open flames can cause explosion.

Due to local laws and vehicles safety considerations, do not manually operate the device while driving.