HP SW450 manual Initial Settings, Setting the Language, Setting the Date & Time

Page 9

Initial Settings

When you turn on your camera for the first time, you will be asked to do the initial settings of your camera. First is the setup of language menu. Specify in which language menus and messages are to be displayed on the LCD monitor.

Setting the Language

1.Press directional buttons to move through the selection.

2.Select a language, and then press OK button .

Setting the Date & Time

1.Press left and right direction buttons to move through the selection.

2.Press the up and down buttons to change the value for the date and time.

3.Press OK button when finished. This will save your date and time settings.

4.If necessary, press Menu button to close the menu.

At this point, the camera settings are set to the default automatic mode and is ready to take photos and videos.

7

Image 9
Contents SW450 Page Attach the Camera Strap Charging the BatteryInserting the Battery To remove the SD/SDHC card Inserting an SD/SDHC Memory CardPage Camera Views Front ViewBack View Bottom View Left/Right View Top ViewInitial Settings Setting the LanguageSetting the Date & Time Photo Mode Modes Selector SwitchVideo Mode Playback ModeTaking Photos Page Using the Function Menu Playback Viewing in Single NavigationStill Image To go to Setup Menu Using the Setup MenuGetting Help North America Page 7525C00145A
Related manuals
Manual 2 pages 37.79 Kb Manual 79 pages 31.34 Kb