Color, Saturation, Metering, Capture Md, Digi. Zoom

Color

This sets the color of the photo that will be captured.

* Standard / Vivid / Sepia / B&W / Blue / Red / Green / Yellow / Purple

This sets the saturation of the photo that will be captured. * High / Standard / Low

This sets the metering method for calculating the exposure.

* Center:	Averages the light metered from the entire frame, but gives greater
	weight to the subject matter at the center.
* Spot:	A very small portion of the center of the screen is measured to
	calculate the correct exposure.
* Average:	The exposure is measured all of the subject area.

This sets the recording method at the time of capturing photos.

* Single:	Captures one photo at a time.
* Continuous:	Permits continuous capture of up to 3 photos.
* AEB:	Permits 3 consecutive photos in the order of standard exposure,
	underexposure and overexposure compensation.
* Album Shot:	Creates an album-like layout to combine 3 shots into a single
	image.
* Burst:	Permits continuous photography while pressing and holding the
	shutter button. As long as you hold the shutter button pressed,
	images are captured until the memory capacity is exhausted.
* Cont.flash:	Permits continuous capture of up to 3 photos with flash.
* Pre-shot:	Select a background by 1st shot, the image shown on display will
	be transparent, then take the 2nd shot on the basis of 1st image.
	Image of 1st shot is only a guiding tool, it won't be saved on SD
	card. Normally this function is used when taking a portrait picture
	and the background is selected by the model instead of the
	photographer.
* Coupl.shot:	Uses separate areas to combine two shots. You can include
	yourself in the photo.
* Burst 30fps:	Permits continuous capture of up to 30 photos in the resolution
	640 x480 within 1 second.
* Interval capture:	Captures continuous photos at a preselected time interval.

This sets whether or not to use digital zoom at the time of photography.