1.Check that the printer is turned on, there is paper in the printer, and there are no printer error messages.
2.Verify that the camera's USB Configuration is set to Digital Camera (see USB Configuration under Using the Setup Menu on page 41).
3.Connect the camera and printer using the USB
cable that came with your camera, then turn on the camera.
4. When the camera is connected to the printer, the Print Setup Menu displays on the camera.
– To change the set of images you want to print, use 
, then follow the
– To edit the selection, press 
, then follow the
–To change other settings, use 
on the camera to select a menu option, then use 
on the camera to change the setting.
5.Press 
to begin printing.
Note If you connect the camera to a
Printing panoramas from the camera
You can print panoramas stitched on the camera (see Stitching panoramas
on page 28) directly to
1.Follow Steps 1 to 3 under Printing images from the camera on page 34, verifying that you have panorama paper in the printer.
2.When the Print Setup Menu displays on the camera, use 
to select an option in Images or press 
and follow the
3.In the Print Setup Menu, highlight Print Size:, use 
to select Panorama, then press 
.
4.In the Panorama Printing Menu, highlight an option.
–Print as
–Select Crop
print. To select the area, press 
, use 
, 
, 
, and 
to position the
green box over the area, then press 
to return to the Panorama Printing Menu.
–Skip This
–
5.When you are done printing, disconnect the camera from the printer.
HP Photosmart R827 Digital Camera | 35 |