HP R827 manual Install and format an optional memory card

and will ensure that images are accurately marked if you use the date and time imprint feature.

1.Use to adjust the highlighted value.

2.Use to move to the other selections and repeat Step 1 until the date and time are set correctly.

3.Press when the date, time, and format settings

are correct, then press again to confirm.

Install and format an optional memory card

This camera supports standard and high speed, HP- branded Secure Digital (SD) memory cards, 8MB to 2GB.

1. Turn off the camera and open the Battery/Memory card door.

2. Insert the optional memory card in the smaller slot as shown. Make sure the memory card snaps into place.

3.Close the Battery/Memory card door and turn on the camera.

Always format new memory cards before first use. Formatting removes all images from the memory card,

English

Setting up your camera 11