Program 10-1– System Assignments, Part 1 of, 3-27

System & Station

Program 10-1 – System Assignments, Part 1 of 3

Processor Type: DK14, DK40i, All RCTUs

Program Type: System

Initialized Default: LEDs 07, 08, 09, 16, 18, 19 and 20 are ON

6SNU+ROG6SNU+ROG6SNU+ROG6SNU+ROG

SELECT = 1

Light the LED Buttons that are marked with an X in the table below.

Button/	X	LED ON	LED OFF
LED	X	LED ON	LED OFF
LED
20		Two-CO Line Conference/Allowed	Not Allowed
			Two-CO line Conference must be allowed for Tandem Line, DISA,
			CF-EXT, and DNIS external routing operation. Also See Program
			15, Code 5.

19		Conference/Allowed	Not Allowed

18		Ring Detect Time-Normal	Ring Detect Time-Short Rings

17		Station to Station Call Volume PAD (-	No Station to Station Call PAD
		8db)

16		BRI Standard Initialization (2 TEIs)	None (TEI = 0)
16		BRI Standard Initialization (2 TEIs)	None (TEI = 0)

15~13		Not Used	Not Used
				System
12		ABR Cycles/10 times	15 times	System
12		ABR Cycles/10 times	15 times

11		ABR Redial time/30 sec.	1 min.

10		System Speed Dial Override, Toll	Restricted	&
		Restriction		&
		Restriction		Station

08		Alternate Point Answer	Transfer Privacy
09		Exclusive Hold/Allowed	Not Allowed

07		Ring Transfer of CO Line Allowed	Not Allowed
			If Ring Transfer is allowed, set Ring Transfer Recall time in Program

			37; if ring transfer is not allowed (LED 07 OFF), the station recalls
			immediately if transfer is attempted.

06		CO Line Repeat Ringing	Standard Ring
			Standard ring pattern is 1 sec. on, 3 sec. off.

05		Incoming Call Abandon 8 sec.	6 sec.

04		CO Line DTMF Signal Time 160 msec.	80 msec.
			LED 04 DTMF Signal Time applies to manual and speed dial tones
			sent out of the system via CO lines. This applies when dialing from
			any Toshiba telephone, including the 2000-series Digital Telephone.
			LED 04 does not apply to Call Forward or Voice Mail ID DTMF tones
			sent to voice mail ports. (See Program 10-2, LED 06, for tones sent
			to Voice Mail ports.)

03		Dial Pulse Make Ratio 33%	40%

02		0.45 or 1.5 sec. per Program 42-0	CO Line Re-seize guard time 0.45
			CO line guard time is the time interval the system requires to release
			a CO line and reseize it. If LED 02 is off, all lines are set with 0.45
			second guard time; if LED is on, guard time is 0.45 or 1.5 seconds
			per Program 42-0.

01		Tone First (from SLTs, DKTs and EKTs)	Voice First (from SLTs, DKTs and EKTs)
			This applies to [PDNs] not [PhDNs]; [PhDNs] are always tone first.

Strata DK Programming 5/99

3-27

dk14 specifications

The Toshiba DK14 and DK40I are advanced digital video recorders (DVRs) that have redefined the standard for high-quality video surveillance systems. Designed primarily for security applications, both models boast a suite of impressive features, making them ideal choices for various environments, including commercial, retail, and educational settings.

The Toshiba DK14 stands out with its exceptional recording capabilities. It supports high-definition video capture, ensuring that every detail is captured with crystal clarity. The device can handle multiple camera inputs, allowing users to connect several surveillance cameras simultaneously, depending on the configuration. With its robust storage capacity, the DK14 can accommodate extended recording times, making it suitable for long-term surveillance needs.

One of the key characteristics of the DK14 is its user-friendly interface, which simplifies operation for both novice and experienced users. The system comes equipped with advanced motion detection technology, enabling it to trigger recording only when movement is detected, significantly optimizing storage use. Moreover, it features remote access capabilities, allowing users to monitor live feeds and review recorded footage from virtually anywhere via smartphone or computer.

In comparison, the Toshiba DK40I offers enhanced features targeted towards users requiring higher processing power and larger storage capabilities. This model is equipped with advanced compression technologies such as H.264, which reduces file sizes without compromising video quality. It can support higher-resolution cameras, further enhancing the clarity and detail of recorded footage.

The DK40I also prides itself on its scalability, accommodating numerous input channels, making it suitable for expansive surveillance setups. Another significant feature is its sophisticated alarm management system, which can integrate with various security sensors and alarms, providing users seamless control over their security environment. The device also supports various video outputs, including HDMI and VGA, ensuring compatibility with a wide range of display systems.

Both models utilize Toshiba's commitment to reliability and performance, incorporating high-grade components designed to withstand the rigors of continuous operation. They are engineered for ease of maintenance, with options for firmware updates and technical support, ensuring that users benefit from the latest advancements in surveillance technology.

Overall, Toshiba’s DK14 and DK40I represent cutting-edge solutions in the realm of digital video recording, offering exceptional performance, versatility, and user-friendly features to cater to diverse surveillance needs.