9 Troubleshooting
Use this section to find information on:
•Resetting the camera (see “Resetting the camera” on page 34)
•Possible problems and solutions (see “Problems and solutions” on page 34)
Resetting the camera
If your camera does not respond when you press buttons, reset the camera.
1.Turn off the camera.
2.Remove the memory card and batteries for at least 5 seconds.
3.Reinsert the batteries and close the Battery/Memory Card door.
4.Turn on the camera. On successful reset, you may be prompted to set the date and time (see “Set the date and time” on page 5).
5.Verify that the camera works without an optional memory card, turn off the camera, then reinstall the card.
When the camera is reset, any images or video clips stored in memory are retained.
Problems and solutions
Use this information to find solutions to common issues you may have using your camera.
NOTE: Known issues are often fixed with new releases of firmware. To optimize your digital photography experience, periodically check the
How can I get
Use the 
Buy Prints Online feature on the 
Photosmart Express Menu (see “Buying prints online” on page 30).
The camera does not turn on.
•Install new or recharged batteries, ensuring that the batteries are inserted correctly (see “Install the batteries” on page 4). If you are using rechargeable batteries, ensure they are rechargeable Nickel Metal Hydride (NiMH) batteries.
•Reset the camera (see “Resetting the camera” on page 34).
•Ensure that the memory card is the proper type (see “Storage” on page 44). If so, remove the memory card and turn on the camera; if the camera turns on, turn off the camera, install the memory card, turn on the camera, and format the memory card (see “Install and format an optional memory card” on page 6). If the camera does not turn on after you reinstalled the memory card, format the memory card using a memory card reader, or replace the memory card.
34 Troubleshooting