Eye-Start
This Setup menu option allows you to turn the eye-start sensor for the viewfinder microdisplay on and off.
zOn—Causes the camera to turn the microdisplay on any time the eye-start sensor detects that you are looking through the viewfinder.
This is the default setting on the camera.
zOff—Disables the eye-start sensor and causes the camera to turn the microdisplay on any time the Image Display is turned off.
NOTE If Eye-Startis set to Off, the microdisplay will automatically turn off if there is no button activity for 60 seconds. To turn the microdisplay on again, either press the Shutter button halfway down or press the
Display 
button.
Date & time
This Setup menu option allows you to set the current date and time, as well as the date/time format, for the camera. This is usually done when you first set up the camera, but you may need to re-set the date and time when you are travelling to different time zones, or when the batteries
are removed from the camera for more than 10 minutes.
To set the date, time, and date/time format, follow the same procedure used in Setting the date and time on page 17.
66 | hp photosmart 850 user’s manual |