8Turn on the speaker system.
9After the speakers are connected to the computer, configure the audio software for sound output for your computer model. See “Configuring Speaker and Sound Options.”
Type 3: See “Configuring Audio Output with Multichannel Sound Manager.”
Type 6: See “Configuring Audio Output with Sound Effect Manager.”
Sound card: See “Configuring Audio Output with a Sound Card.”
The following diagram shows a typical 4.1 audio installation:
OUTIN
Connecting 5.1 (Five Speakers and a Subwoofer) Audio Speakers
To connect two front speakers, two rear speakers, a center speaker, and a subwoofer for
1Turn off the computer.
2Connect the front speaker cable to the lime green Audio Line Out connector that matches the back of your computer.
3 | 6 | S |
NOTE:
Type 3 is three connectors.
Type 6 is six connectors.
Type S is sound card.