Selecting Recording Devices
(Type 6 connectors only)
To select a sound recording device:
1Click Start on the taskbar.
2Choose Control Panel.
3Click Sounds and Audio Devices (or Sounds, Speech, and Audio Devices). The Sounds and Audio Devices window opens.
4Click the Audio tab. The window opens.
5In Sound Recording, select a recording device.
6Click OK.
7Close the window.
Resolving Sound Issues
If you don’t have sound from your speakers, check the following:
•Check volume and mute settings.
•Use active, powered speakers, or speakers with an amplifier.
•Verify cable connections.
•Make sure the software program and sound software are configured.
•Some programs may result in low volume, even when the Volume knob is turned to the maximum position. If this is the case,
•Reconfigure the sound software for surround sound.
•Reinstall the sound card drivers by using HP or Compaq Application Recovery. See “Application Recovery” in the PC Troubleshooting and Maintenance Guide.