I9 | Returns country code |
L0 | Low speaker volume |
L1 | Low speaker volume |
L2 | Medium speaker volume |
L3 | High speaker volume |
M0 | Speaker always off |
M1 | Speaker on until carrier detected |
M2 | Speaker always on |
M3 | Speaker off during dialing, on until carrier detected |
O0 | Return online to Data Mode |
O1 | Issue a retrain before returning to Data Mode |
P | Pulse dial |
Q0 | Result codes enabled |
Q1 | Result codes disabled |
T | Tone Dial |
V0 | Display result codes as digits |
V1 | Display result codes as text |
Y0 | Disable long space disconnect |
Z0 | Reset & recall user profile 0 |
Z1 | Reset & recall user profile 1 |
&F | Load factory default configuration |
&M0 | Asynchronous mode operation |
&S0 | DSR always ON |
&S1 | DSR comes on when establishing a connection and goes off when the connection |
| ends |
&V | View Active profile |
&W0 | Store active profile as Profile 0 |
&Y0 | Select Profile 0 upon Power on or reset |
&Zn=x Store phone number x into | |
\N0 | Buffer mode, no error control |
\N1 | Direct mode |
\N2 | MNP reliable mode |
\N3 | V.42, MNP, or buffer mode (autoreliable mode) |
\N4 | V.42 mode or disconnect |
\Q0 | Disable flow control |
\Q1 | XON/XOFF software flow control |
\Q3 | RTS/CTS hardware flow control |
\Tn | Inactivity timer, |
\V0 | Disable protocol result code appended to DCE speed |
\V1 | Enable protocol result code appended to DCE speed |