HP 6738 (US), 6831 (LA) manual Jumper settings Master/slave configuration, Options jumper block

Page 25

18

U Series 5 Family Product Manual, Rev. B

2.2 Jumper settings

2.2.1 Master/slave configuration

The options jumper block shown in Figure 2 is used to configure the drive for operation. It is the 8-pin dual header between the interface connector and the power connector. Use the following settings to configure the drive as a master or a slave.

Master or single drive. The drive is configured at the factory for a master or single-drive operation with a jumper set on pins 7 and 8.

Drive as slave. Remove all jumpers.

Drive as master with a non-ATA-compatible slave.

Set a jumper on pins 5 and 6 and a jumper on pins 7 and 8. Use this jumper setting only if the drive does not work as a master with no jumpers installed.

Options jumper block

Master or single drive

Drive is slave

Master with non ATA- compatible slave

Cable select

Limit drive capacity

40 Gbytes = 32 GB

<40 Gbytes = 2.1 Gbytes

7 5 3 1

8 6 4 2

Circuit Board

Figure 2. Master/slave jumper settings

Image 25
Contents Series 5 Family Series 5 Family Page Contents ATA interface Configuring and mounting the driveFigures Series 5 Family Product Manual, Rev. B Introduction Specification summary table ST340823A ST330621A Wet bulb tempera Ture C max LBA Mode Default logical geometryFormatted capacity Physical organization Physical characteristicsRecording and interface technology Seek time Power specificationsStart/stop times Power consumption Typical current profile Power Mode Typical Watts Typical Amps RMS 12VConducted noise Power Modes Heads Spindle Buffer Power-management modesActive mode Idle modeTemperature gradient Environmental tolerances Ambient temperatureSleep mode Idle and Standby timers3.1 Relative Humidity 3.2 Wet bulb temperatureAltitude ShockDrive acoustics Nonoperating vibrationReliability Electromagnetic immunityElectromagnetic compatibility Agency certification Safety certificationKorean RRL Australian C-Tick N176 FCC verificationHandling and static-discharge precautions Configuring and mounting the driveDrive as master with a non-ATA-compatible slave Jumper settings Master/slave configurationOptions jumper block Alternate capacity jumper Cable-select optionUltra ATA/100 cable Drive mounting Mounting dimensions-top, side and end viewATA interface ATA interface signals and connector pinsO pins and supported ATA signals Command name Command code in hex ATA-standard commands Supported ATA commandsCommand name Identify Drive commandATA-standard power-management commands ATA-standard security commands0C5AH Word DescriptionXx07H Word Description ValueXx3FH Bit Word Description if bit is set to Bit WordSet Features command 0CH 4 S.M.A.R.T. commandsCode in Features A.R.T. Command Register Page
Related manuals
Manual 2 pages 25.9 Kb Manual 2 pages 62.96 Kb Manual 1 pages 14.04 Kb Manual 7 pages 54.38 Kb

6738 (US), 8829 (LA), 8822 (LA), 6831 (LA) specifications

HP offers a diverse range of printers designed to meet the varying needs of businesses in today’s demanding environment. Among these, the HP 6831 (LA), HP 8825 (AP), HP 9703 (AP), HP 7705 (AP), and HP 7706 (AP) stand out for their innovative features, advanced technologies, and remarkable characteristics.

The HP 6831 (LA) is tailored for high-capacity printing demands. This model showcases HP’s latest printing technology, delivering vibrant and professional-quality documents with a resolution of up to 1200 x 1200 dpi. The printer supports mobile printing options, allowing users to print directly from their smartphones and tablets, thus enhancing productivity. With a workgroup-friendly design, it can accommodate various media types, making it versatile for any office environment.

The HP 8825 (AP) is engineered to cater to larger teams requiring efficient printing solutions. It offers a robust print speed of up to 70 pages per minute, significantly reducing waiting times during busy periods. This model also features automatic duplex printing, which helps conserve paper and streamline operations. The HP 8825’s intuitive touchscreen interface provides easy navigation, allowing users to access frequently used functions quickly.

For businesses seeking high-quality color printing, the HP 9703 (AP) excels with its exceptional color accuracy and sharp text output. Utilizing HP’s proprietary ink technology, this printer produces vivid images and detailed graphics that are ideal for marketing materials and professional presentations. Moreover, with a monthly duty cycle that supports large print volumes, the HP 9703 is built for performance.

The HP 7705 (AP) and HP 7706 (AP) models are designed to meet the unique requirements of various workspaces. Both printers are equipped with advanced security features that ensure sensitive information is protected during printing. Additionally, these models utilize fast processing speeds and automatic document feeders, enhancing their overall efficiency in busy office settings. The touch-enabled control panels simplify operational commands, making them user-friendly for personnel at all levels.

In summary, the HP 6831 (LA), HP 8825 (AP), HP 9703 (AP), HP 7705 (AP), and HP 7706 (AP) embody HP's commitment to innovation, quality, and efficiency. With their array of features, these printers cater to the diverse printing needs of modern businesses, ensuring that users can achieve remarkable results while maintaining productivity and security. Each model stands as a testament to HP’s advancements in printing technology, making them invaluable assets in any professional setting.