HP 794.es, 734.uk, 744.nl, 784.no, 764.it manual Enabling Television Display, When you connect your PC

When you connect your PC

to a television or to a TV signal source, the ATI All-In-Wonder card provides several features you can operate with the ATI remote control, such as: TV-On-Demand™, zoom-in control, scheduled viewing, channel scanning, an interactive program guide, and closed captioning.

Note: Scheduled viewing, closed captioning, and the interactive program guide are not available in all countries/regions.

Please refer to the information in the Quick Setup Guide (cable installation) poster that came with your ATI All-In-Wonder card for information about how to install the correct audio and video cables.

Enabling the

Television Display

After you attach all the required video and audio cables between the TV and PC, you need to restart your PC. If you choose to connect your PC to a TV, the default display setting is to have the TV and monitor display the Windows® desktop simultaneously. TV out is an optional feature.

To enable your TV and PC displays:

1Click Start on the taskbar.

2Click Control Panel.

3Click Appearance and Themes, if it is present.

4 Double-click Display.

5 Click the Settings tab, and then click the Advanced button.

6 Click the Displays tab, and then select the TV option.

7 Click OK.

Important: If the TV option is dimmed, your TV may not

be connected to the PC properly. For the TV option to appear, you may need to restart your PC after you connect the video cables.

2 Using the ATI All-In-Wonder Card