HP 23-p009, 23-p020t, 23-p029c manual Locating internal components, Removing and installing memory

Locating internal components

The following sections contain procedures for removing and replacing these internal components:

●Optical disc drive

●Hard disc drive, solid state drive, or self-encrypting drive

●Battery

●Memory

Figure 3-12Locating internal components

Component		Component
1	Optical disc drive	3	Battery
2	Hard disc drive	4	Memory

Removing and installing memory

The computer comes with double data rate 3 synchronous dynamic random access memory (DDR3- SDRAM) small outline dual inline memory modules (SODIMMs).

SODIMMs

The memory sockets on the system board can be populated with up to two industry-standard SODIMMs. These memory sockets are populated with at least one preinstalled SODIMM. To achieve the maximum memory support, you can populate the system board with up to 16 GB of memory.

DDR3-SDRAM SODIMMs

For proper system operation, the SODIMMs must be:

●industry-standard 204-pin

●unbuffered non-ECC PC3-10600 DDR3-1600 MHz-compliant

●1.5 volt DDR3-SDRAM SODIMMs

Locating internal components 21