Removing and Replacing a CD/DVD Drive
10 - 15 minutes
Before You Begin
Observe the following requirements before removing and replacing the hard disk drive.
Tools Needed
Flathead screwdriver
Phillips screwdriver #1
CAUTION: Static electricity can damage the electronic components inside the computer. Discharge static electricity by touching the metal cage of the computer before touching any internal parts or electronic components.
WARNING:
Never open the cover with the power cord attached or power applied. You may damage your computer.
Avoid touching sharp edges inside the computer.
IMPORTANT: Computer features may vary by model.
Computer Preparation
1Remove any media (CD, DVD, and memory cards) from the computer.
2Press the power button to turn off the computer.
3Unplug the computer by disconnecting the power cord from the back of the computer.
4Unplug all attached cables from the back of the computer.
6 |
|