HP 800 G1 manual DMA=1, Printer Mode, Epp+Ecp, Bus Options Yes PCI SERR# Generation

,

Feature		Function	Default setting,	Reboot
			if applicable	required
	Option ROM Prompt	Displays the Option ROM prompt on POST screen	Enabled	Yes
	After Power Loss	Specifies system state after power loss	Off	Yes
	POST Delay (in seconds)	Specifies amount of delay to add during POST for certain peripherals	None	Yes
 Remote Wakeup Boot Source		Specifies boot device after a remote wakeup event	Local Hard Drive	No
 Factory Recovery Boot Support		Enables BIOS support for HP Backup and Recovery tools	Disabled	Yes
 Bypass F1 Prompt on		Allows system to boot without user input after configuration change	Disabled	No
	Configuration Changes	(for example, memory size)
BIOS Power-on		Specifies time and day(s) when system automatically wakes from the	Disabled	Yes
		S5 (off) state
Onboard Devices		Specifies a Legacy Device’s IRQ, DMA, and I/O Range settings	Serial Port A:	Yes
			IO=3F8h, IRQ=4
			Parallel Port:
			IO=378h, IRQ=7,
			DMA=1
			Printer Mode:
			EPP+ECP
Bus Options				Yes
	PCI SERR# Generation	Enables PCI device to generate SERR# (System Error), as defined by	Enabled	Yes
		the PCI specification
 PCI VGA Palette Snooping		Enables VGA palette registers snooping	Disabled	Yes
Device Options – All-in-One (AIO) systems				Yes
	Turbo Mode	Enables processor feature that optimizes core frequencies can be	Enabled	Yes
		optimized for performance based on the load on each core
 Num Lock State at Power-on		Enables Number Lock at boot	Off	Yes
	LVDS Panel Select	Enables panel type/vendor selection override	Automatic	Yes
	Internal Speaker	Enables or disables the internal speaker	Enabled	Yes
 USB EHCI Port Debug		Forces all USB ports to use USB 2 for debugging utilities and other	Disabled	Yes
		applications that do not support USB 3
	Multi-processor	Enables BIOS to report multiple processor cores to the OS	Enabled	Yes
	Hyperthreading9	Enables hyperthreading capability on Intel processors; some programs	Enabled	Yes
		may run better with this feature disabled.
	USB Charging Port	The top left-side USB port on AIO systems can be used to charge USB	Enabled	Yes
		devices when the system is powered off.
Device Options – Other systems				Yes
	Turbo Mode	Enables processor feature that optimizes core frequencies can be	Enabled	Yes
		optimized for performance based on the load on each core
 Num Lock State at Power-on		Enables Num Lock at boot	Off	Yes
	Integrated Video	Enables integrated video controller	Enabled	Yes
	Internal Speaker	Enables or disables the internal speaker	Enabled	Yes
 USB EHCI Port Debug		Forces all USB ports to use USB 2 for debugging utilities and other	Disabled	Yes
		applications that do not support USB 3
	Multi-processor	Enables BIOS to report multiple processor cores to the OS	Enabled	Yes

9Intel HT Technology (HT) is designed to improve performance of multi-threaded software products and requires a computer system with a processor supporting HT and an HT-enabled chipset, BIOS and OS. Please contact your software provider to determine compatibility. Not all customers or software applications will benefit from the use of HT. See http://www.intel.com/info/hyperthreading for more information.

17