HP dx5150 RAID Installation and Setup Guide
4.When the ‘Onboard Chip SATA’ appears select ‘RAID Controller,’ press Enter to accept this selection and save the setting to CMOS.
Note: To increase the amount of time needed to access the BIOS RAID utility during post, you can change the default value of zero seconds. The option to change the ‘POST Delay’ is in the F10 BIOS Setup in the ‘Standard CMOS Features’ menu.
Create RAID Sets
1.During computer startup (POST), press the F4 function key to enter the BIOS RAID Configuration Utility.
2.Select ‘Create RAID set’ option.
3.Choose ‘Striped’ (RAID 1).
10 | www.hp.com | Installation and Setup Guide |