HP SR5410F, SR5558D, SR5470AN, SR5450F, SR5448F manual Configuring the TV Tuner, Connecting to S-video

Connecting to S-video

WARNING: In this example, Input 3 has both S-video and Video connectors, which share the left and right Audio connectors. Connect only one video input for Input 3.

1Connect the S-video equipment to the S-video connector (Input 3 in this example):

2Connect the audio cable connectors to the left and right Audio connectors for Input 3.

3Connect the cables to the device.

4Turn on the device, and start play.

5Plug in the computer.

6Turn on the computer.

Configuring the TV Tuner

The computer includes a TV tuner that can receive analog or digital (DVB-T) broadcasts.

NOTE: In the countries/regions that do not support digital tuner functionality, you must use the analog tuner.

You must run the Windows Media Center setup wizard to configure (or confirm) the following settings on the computer:

￿Country/region where the computer is being used

￿Whether you want to receive analog or digital broadcasts (you cannot receive both at the same time)

NOTE: You need to select analog or digital if you are using an antenna to receive TV signals. You do not need to perform this part of the setup if you are using a cable or satellite set-top box.

56Advanced Setup Guide (features vary by model)