•Digital Audio — selects the digital audio output and digital audio frequency for the digital audio connectors on the PC.
•Audio Wizard — opens a window that shows the connector panel on the front of the PC. To close the window without enabling the wizard, click OK.
To enable the Audio Wizard:
Make sure the Enable auto detection check box is selected to enable the wizard. Click OK to close the window.
Using the Audio Wizard in the Sound Effect Manager
When you click the Audio Wizard button, a window opens that shows the three audio connectors on the front of the PC.
NOTE: The connectors on the front of your PC may be of a different type or may be in a different arrangement; look for the connector icon and color. Location, availability, and number of connectors may vary.
| / | C |
|
|
|
| A |
|
|
| |
|
|
|
|
| |
A B C |
| B |
|
|
|
|
|
|
|
| |
Connector | Name |
| Icon |
| Color |
A | Audio Line In |
|
|
| Light blue |
|
|
|
| IN |
|
B | Microphone |
|
|
| Pink |
C | Headphones |
|
|
| Lime |
| Or |
|
| Or | green |
| Audio Line Out |
|
| OUT | |
Retasking using the Audio Wizard (6-connector)
With the Audio Wizard enabled, both the microphone connector (B) and the headphones connector (C) on the front of the PC can be retasked to perform a different audio function. These two connectors are universal audio jacks. When you plug in a cable, the Wizard asks you to select the function for the cable from a list, and then it sets the universal audio jack to perform as the selected function. The functions are:
•Stereo speaker (out)
•Microphone (in)
•Headphone (out)
•Audio line in