Power
Symptom | Problem | Solution |
|
|
|
PC will not turn on or start. | PC is not securely connected to | Ensure that cables connecting the PC to the external power |
| an external power source. | source are plugged in properly. |
|
|
|
| Green power supply light on | When the cables connecting the PC to the external power |
| back of PC is out. | source are plugged in properly and the wall outlet is |
|
| functioning, the green power supply light should be on; if the |
|
| light is not on, refer to the Warranty and Support Guide to |
|
| contact Support. |
|
|
|
| Monitor is not connected or is | Connect the monitor to the PC, plug it in, and turn it on. |
| not on. |
|
| Line voltage selection switch is | Set the line voltage selection switch to the correct setting for |
| not in the proper position for | your country/region, or refer to Support. |
| your country/region |
|
| (115V/230V). |
|
|
|
|
| Wall outlet is defective. | Test the outlet by connecting a different electrical device to the |
|
| outlet. |
Invalid system disk | A diskette has been left in the | When drive activity stops, remove the diskette and press the |
Or | drive during startup. | spacebar. The PC should start up. |
|
|
|
error |
|
|
message displays. |
|
|
|
|
|
PC appears locked up and | PC is not working. | Press and hold the On button until the PC turns off. |
won’t turn off when the On |
|
|
button is pressed. |
|
|
|
|
|
Recovering From Software Problems
The PC uses the operating system and installed software programs during normal operation. If your PC works improperly or stops because of the software, you may be able to repair it.
The Software Repair Wizard (select models only) is an icon on the desktop or in the Organize software program, or in the Help and Support Center. To start the wizard, click the icon or click Start, choose All Programs, PC Help & Tools, and then click Software Repair Wizard.
Click the Software Repair Wizard icon to repair software problems with programs, printers, or peripherals that stop working, or to resolve erratic PC behavior. Repair options include using the Compaq Application Recovery or Compaq System Recovery programs.
You need recovery discs (CDs or DVDs) for some repairs that use the Compaq Application Recovery program or the Compaq System Recovery program. The PC does not include recovery discs in the accessory box, but you can make your own recovery CDs or DVDs; see “Creating Recovery CDs/DVDs.”
CAUTION: It is strongly recommended that you create your recovery discs before you need them.
You should also make the Compaq Recovery Tools CD. This CD contains utilities that allow you to make changes to your hard disk drive, including removing the recovery partition.
See “Using the Recovery Tools CD.”
6