FCC Regulatory and Safety Information USA Only

FCC Regulatory and Safety Information (USA Only)

Federal Communications Commission (FCC) Radio Frequency Interference Statement

WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet that is on a circuit different from the receiver.

•Consult the dealer or an experienced radio/TV technician for help.

Compaq’s system RFI and Radiated Immunity tests were conducted with Compaq-supported peripheral devices and Compaq-shielded cables, such as those you receive with your system. Changes or modifications not expressly approved by Compaq could void the user’s authority to operate the equipment. To comply with the limits for an FCC Class B computing device, always use shielded signal cables and the power cord supplied with this unit.

•The telephone company may make changes in its technical operations and procedures. If such changes affect the compatibility or use of this device, the telephone company is required to give adequate notice of the changes.

•If the telephone company requests information on what equipment is connected to their lines, inform them of:

a The telephone number this unit is connected to b The ringer equivalence number

c The USOC jack required: RJ-11C d The FCC Registration Number

Items (b) and (c) are indicated on the label. The ringer equivalence number (REN) is used to determine how many devices can be connected to your telephone line. In most areas, the sum of the RENs on any one line should not exceed five (5.0). If too many devices are attached, they may not ring properly.

•In the event of equipment malfunction, Compaq or an authorized Compaq Personal Computer Dealer Repair Center should perform all repairs. It is the responsibility of users requiring service to report the problem to Compaq’s Consumer PC Division, or to one of our authorized agents. Service can be obtained by calling the Compaq Customer Support Center at 1-800-OK-COMPAQ (United States).

Statement of Fax Branding

The Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via telephone fax machine, unless it clearly contains: A margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent, identification of the business or other entity, or individual sending the message, the telephone number of the sending machine or such business, entity, or individual.

Consumer Information and

FCC Requirements

Telephone Connection

•This equipment complies with Part 68 of the Federal Communications Commission rules. These rules permit this device to be directly connected to the telephone network. Standardized jacks are used for these connections. This equipment should not be used on party lines or coin lines.

•If this device is malfunctioning, it may also cause harm to the telephone network; this device should be disconnected until the source of the problem can be determined and until it has been repaired. If this is not done, the telephone company may temporarily disconnect your service.

ENERGY STAR Compliance

Compaq Presario PCs and Monitors marked with the ENERGY STAR® logo on the packaging box qualify with the U.S. Environmental Protection Agency’s ENERGY STAR guidelines for energy efficiency.

Products with the ENERGY STAR label are designed to use less energy, help you save money on utility bills, and help protect the environment.

ENERGY STAR® is a registered trademark owned by the U.S. government.

SR1033WM, SR1010V (PU025AV), S7300CL, SR1023WM, SR1010V (P8657G) specifications

The HP S7300CL is a standout model in the realm of storage solutions, particularly designed for high-performance and expansive data environments. This solid-state drive (SSD) is tailored to meet the demands of enterprise-level applications, providing an exceptional blend of speed, reliability, and capacity.

One of the hallmark features of the HP S7300CL is its remarkable read and write speeds, which significantly enhance data transfer rates. With a read speed that can reach up to 3,500 MB/s and a write speed of around 3,000 MB/s, this SSD allows for seamless handling of large files and applications. This level of performance is particularly beneficial for data-intensive tasks such as video editing, 3D rendering, and complex database operations.

The S7300CL employs the NVMe (Non-Volatile Memory Express) protocol, which optimizes the drive's performance by utilizing the PCIe (Peripheral Component Interconnect Express) interface. This combination ensures lower latency and higher throughput compared to traditional SATA drives, making it an ideal choice for modern computing needs. The advanced controller technology further enhances performance, allowing for efficient data management and improved endurance.

In terms of capacity, the HP S7300CL offers a range of options, typically available in sizes from 256GB to 2TB. This versatility enables businesses to select a suitable configuration based on their storage requirements without compromising on performance. The drive is also built with robust endurance, boasting high TBW (terabytes written) ratings, which are essential for enterprise environments where data is frequently read and written.

The HP S7300CL also incorporates advanced security features, including AES 256-bit hardware encryption. This ensures that sensitive data remains secure from unauthorized access, complying with industry standards for data protection. Furthermore, the drive supports TRIM and S.M.A.R.T technology, which contributes to the longevity and health of the SSD by optimizing performance and managing available storage space efficiently.

In conclusion, the HP S7300CL SSD is an exceptional choice for organizations seeking high-speed, reliable, and secure storage solutions. Its combination of NVMe technology, impressive read/write speeds, generous capacities, and strong security features make it a compelling option for enterprise data management and demanding applications. With the ability to handle intensive workloads seamlessly, the S7300CL stands out as a leading choice for modern storage needs.